All about product
Reviews
Questions
Information
It is a super powerful VTX with a maximum power of 1600 mW and five adjustable gears: Pit/25 mW/200 mW/600 mW/1600 mW. RAD uses a double-layer printed circuit board to separate the power supply from the main board, which can reduce and shield interference. Double-layer structure for better heat dissipation. The built-in microphone on the VTX board supports 7-36V (2-8S Battery) voltage input, uses MMCX main connector, and the mounting hole is 30.5 × 30.5mm.
Function:
1600 mW superpower, suitable for long flights with good stability.
Five power channels: PIT mode/25mW/200mW/600mW/1600mW.
Double-layer board cooling design, Separate power supply BEC and main board, Reduction and shielding from internal interference.
Temperature control protection function, which can prevent high temperature burning
Wide voltage input, Supports 7-36V voltage input.
VTX control protocol – IRC Tramp, supports adjusting OSD parameters.
VTX built-in microphone, real-time transmission of drone sounds.
Has 3 regional frequency tables to meet the needs of different regions.
Two function buttons, three light indicators, easy to control.
Mounting hole 30.5mm x 30.5mm.
Specifications:
Model: GEPRC RAD VTX 5.8G 1.6W
Input voltage: 7-36V DC (2-8S battery)
Output: 5V@600mA (power 5V to the camera)
Input impedance: 75 ohms
Protocol: IRC Tramp
Antenna interface: MMCX
Output power: PIT mode/25mW/200mW/600mW/1600mW PIT MODE
Frequency tables: Universal frequency table (40CH), American FCC frequency table (37CH), European EU frequency table (26CH)
Video format: PAL / NTSC
Microphone: built-in microphone
- Size: 36×36.5×5.5 mm
Weight: 9.7 g (without cable)
Mounting hole: 30X30 mm (M3)
Warning:
Install the antenna before use.
To prevent overheating, ensure constant air flow and a well-ventilated environment. Install a cooling fan if working indoors.
5V output is for camera/cooling fan only! Do not connect the power input/battery to the 5V output, the VTX will be seriously damaged.
Description of connector definition:
DC 7-36V: input 2-8s Battery powered
GND: common ground wire
Video: Connect to FC or camera video output
IRC: Connect to UART TX FC port
5V OUT: 5V power output for the camera
GND: common ground wire
Description of the button and light indicator:
The two function buttons are parallel in the VTX circuit, and the operation and function are the same
Blue light: Ch indicator
Green light: range indicator
Red light: power indicator
Includes:
1 x GEPRC RAD VTX 5G8 1.6W
1 x 72mm MMCX copper tube antenna
1 x GH 1.25*6P 150mm connecting cable
1 x MMCX to SMA connector（female hole）
1 x matching set of screws.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
We deliver orders throughout the country.
The terms of delivery of the order depend on the availability of goods in the warehouse. If at the time of placing the order, all the selected goods are available, then we will deliver the order within 1-2 days, depending on the remoteness of your region. If the ordered product is not in stock, the maximum delivery time of the order can be 5 days. But we try to deliver orders to customers as quickly as possible, and 90% of customer orders are shipped within the first 1-2 days.
Payment methods:
Payment upon receipt
Online card payment
Payment at the terminal
Non-cash settlement
- Ukrposhta
- By courier in Khmelnytskyi - UAH 60.
- Pickup: Khmelnytskyi, Starokostyantinivske highway 26A (Business center City Tower Mall)
- Payment made
- Payment online (Visa/MasterCard)
- Replenishment according to details
- 100% original product
- Turnaround time 14 days from the moment the goods are received
%20SG-5010%20/2784_1-200x200.jpg "Analog servo mechanism TowerPro (Fungwan) SG-5010 47g/5.5kg/0.19sec (4.8V)")